ITA air distribution heads for compact air distribution

Air distribution heads ITA

ITA air distribution heads are compact, ideal for applications where space is limited but airflow remains crucial.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Air distribution heads ITA

Compare Performances

Air distribution head - ITA-35, 2xØ200

More information

Performance Chart

	Air distribution head - ITA-35, 2xØ200
Connection Diameter (mm)
Diameter (mm)	2x200
Color (RAL)

Heat calculator

Calculate how much kW is needed for a specific room.

Length (m)

Width (m)

Height (m)

Desired indoor temperature (°C)

Outdoor temperature (°C)

K-value (W/m³·K)

Ventilation (Air changes per hour)

Air flow (m³/u)

Output (KW)

Calculated heat demand *

Characteristics

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.