Thermobile filters and water separators for oil-fired systems

Oil filters and water separators

Thermobile oil filters and water separators protect your oil-fired equipment from contaminants and moisture. This extends the life of your system and optimises performance.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Oil filters and water separators

Compare Performances

Oil filter - ITA/IMA/IMAC/MBC, Heated

More information

Oil filter and water separator set - IMA/IMAC

More information

Oil filter and water separator set - ITA/IMA/IMAC/MBC

More information

Performance Chart

	Oil filter - ITA/IMA/IMAC/MBC, Heated	Oil filter and water separator set - ITA/IMA/IMAC/MBC	Oil filter and water separator set - IMA/IMAC

Heat calculator

Calculate how much kW is needed for a specific room.

Length (m)

Width (m)

Height (m)

Desired indoor temperature (°C)

Outdoor temperature (°C)

K-value (W/m³·K)

Ventilation (Air changes per hour)

Air flow (m³/u)

Output (KW)

Calculated heat demand *

Characteristics

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.