IMA- Large Indirectly Fired Hot Air Guns

IMA

The Thermobile IMA is a high-efficiency mobile indirect-fired air heater. Standard equipped with a maintenance-friendly Intercal front burner that can burn diesel, HVO and GTL. Suitable for heating larger spaces.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Diesel
Petroleum/Kerosene
HVO
GTL
Optional: Propane Gas
Optional: Natural Gas

IMA

Compare Performances

Heat calculator

Calculate how much kW is needed for a specific room.

Length (m)

Width (m)

Height (m)

Desired indoor temperature (°C)

Outdoor temperature (°C)

K-value (W/m³·K)

Ventilation (Air changes per hour)

Air flow (m³/u)

Output (KW)

Calculated heat demand *

Characteristics

Automatic burner control with thermostat connection.

High-efficiency heat exchanger ( approx. 92% ).

Blow-out temperature with a delta ΔT of about 47°C.

Equipped with overheating protection and temperature limiter.

Fuel-efficient thanks to highly efficient heat exchanger and recirculation connection option.

Maintenance-friendly and easy to operate.

Easily movable.

Transport via wheels, forklift slots or lifting eyes.

Equipped with intercal industrial burner with flow control. Alternative burners available. (Riello oil or gas burner, for example).

Fleet Manager Essentials possible.

Applications
Documents

Heating of storage sheds, work areas, halls sorting areas, construction sites, greenhouses and polytunnels.
Drying of new construction and renovation projects.
Drying and preservation of agricultural products.

40019003__10__MANUAL__IMA__LR 40022010__06 IMA 61 111 150 200 RAD 40022020__03 IMA 61 111 150 AXIAAL

Heating of storage sheds, work areas, halls sorting areas, construction sites, greenhouses and polytunnels.
Drying of new construction and renovation projects.
Drying and preservation of agricultural products.

40019003__10__MANUAL__IMA__LR 40022010__06 IMA 61 111 150 200 RAD 40022020__03 IMA 61 111 150 AXIAAL

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.