ITA

Oil-fired with flue gas outlet

The Thermobile ITA is a mobile indirect oil-fired air heater. It is ideally suited for heating construction sites, warehouses and workshops. Known for its reliability, efficiency and ease of use, the ITA is also widely used for heating tents , temporary shelters and emergency hospitals.

Need advice? Call +31 (0)7 65 87 34 50  or send a message

Diesel
HVO
Petroleum/Kerosene

ITA

Compare Performances

Heat calculator

Calculate how much kW is needed for a specific room.

Length (m)

Width (m)

Height (m)

Desired indoor temperature (°C)

Outdoor temperature (°C)

K-value (W/m³·K)

Ventilation (Air changes per hour)

Air flow (m³/u)

Output (KW)

Calculated heat demand *

Characteristics

Blow-out temperature with a delta ΔT of 50°C.

High-efficiency heat exchanger ( approx. 89% ).

The ITA Robust version features tank heating, forklift slots, steel wheels and a protective bar all around.

As an option, an air hose for recirculation can be connected to all models.

Robust lifting bracket available as an option.

Composed of high-quality sheet metal with powder coating for a long service life.

Possibility of connecting air hoses for targeted heating.

Equipped with a fuel tank for at least 16 hours of burning.

Applications
Documents

Heating storage sheds, workspaces and construction sites.
Heating of tents, temporary shelters and emergency hospitals.
Drying and preservation of agricultural products.

40020005__10__MANUAL__ITA(S)40022030__05 ITA 35 45 75 40022132__06 ITA 45 ROBUST 40022131__05 ITA 75 ROBUST

Heating storage sheds, workspaces and construction sites.
Heating of tents, temporary shelters and emergency hospitals.
Drying and preservation of agricultural products.

40020005__10__MANUAL__ITA(S)40022030__05 ITA 35 45 75 40022132__06 ITA 45 ROBUST 40022131__05 ITA 75 ROBUST

Frequently Asked Questions

The temperature of the intake air is cooled back by about 12°C. It is therefore important to always recirculate the air from the room to be cooled. (In this case, the air is drawn in from the room and blown back into the room with a temperature approximately 12°C lower).

This depends on the area and volume, insulation of the building and application. A rule of thumb is 40W per m3 for insulated buildings and 60W per m3 for tents, for example.

For all heaters with an oil-fired auxiliary burner, the burner can be replaced with a gas-fired auxiliary burner.